HomeDefence-24
Slugmaker Ammo6 | HDR50 | DIY cal.50 first strike mold
Slugmaker Ammo6 | HDR50 | DIY cal.50 first strike mold
Couldn't load pickup availability
Slugmaker Ammo6 | HDR 50 | first strike
Selection:
- Homedefence-24 Edition adapted to our run
- Ammo6 for the standard barrel and suitable for the SolidCore barrel
Details | Improvement:
- flexible Ammo6 V9 spiral ammo mold for 3 magazines (18 balls)
- matched ammunition to the standard/tuned barrel
- Material: 2K high-temperature silicone, temperature stable up to 250 degrees
- no lubricant to make the ammo
- put desired steel ball and hot glue/polyurethane/epoxy in the mold and let harden
- easy removal of the finished ammunition by "popping" out
- Due to the shape, high performance increase of up to 30 joules
Due to the conical shape and the adjusted weight as well as the sloping grooves in the rear area of the bullet, it is set in a fast longitudinal rotation when fired.
Perfect fit in the original drum and in the aluminum drum.
Do you have any questions or other concerns? Then feel free to contact us! See other auction more interesting items for the HDR 50, HDS 68 and SG 68!
Anyone who violates copyright law (e.g. copying the content to their own website without permission) is liable to prosecution in accordance with § 106 et seq. Copyright Act. He is also cited for a fee and must pay compensation.
Produktsicherheitsverordnung (GPSR)
|
Name: Adresse:
URL: E-Mail: |
HomeDefence-24 GmbH Forststr. 67 92439 Bodenwöhr www.homedefence-24.com info@homedefence-24.com |
Importeur / EU-Verantwortlicher
|
Name: Adresse:
E-Mail: |
HomeDefence-24 GmbH Forststr. 67 92439 Bodenwöhr info@homedefence-24.com |
Spedizione veloce e prodotti ottimi
I have bought the .68 mould last year ont he site, the quality is better than this one. bad deburring on the top. It seems that less care has been taken to make it.
It does the job anyway. Watch picture attached, most edge of the holes are ugly like the firts one
I made mini buckshot projectiles as a first try and they came out perfectly. Secondly 125gr .357 bullets casted in hardwax. Again perfect. Slugmaker 6 warms up fast in any oven to 110 degrees, cools down rapidly the fridge and any wax spillage is easy to clean. Very high quality product that will not brake the bank. 10/10
This is excellent. After a bit of trial and error, I’ve made about 300 slugs in a couple of days. I’ve made some from wax, which were easier but mostly from hot glue and 8mm ball bearings which fly well and hit hard and are reusable. Very happy with this
Bien reçu en parfait état, fabrication de slugs en epoxy et bille acier, résultat super...
Je recommande ...jcmt85 (France)